Are You Nuts? Know your Fishing Knots! – The San Diego Jam Knot

HomeFishingRunning

Are You Nuts? Know your Fishing Knots! – The San Diego Jam Knot

The San Diego Jam Knot, as its name implies comes from a sportfishing capital of the world. The city is the gateway to the Pacific for anglers cha

Opens anglers face a challenge from changing conditions
Video: How to Catch Pike and Musky on a Fly
9-Year-Old Boy Catches Earthworm of Epic Proportions

Are You Nuts? Know your Fishing Knots! – The San Diego Jam Knot

The San Diego Jam Knot, as its name implies comes from a sportfishing capital of the world. The city is the gateway to the Pacific for anglers chasing after tunas, seabass, and yellowtail. The San Diego Jam Knot was originally tied as a quick and easy way of tying “irons” jigs when chasing big tuna on long-range boats off the coast of Mexico.

This knot is a great choice for all line types: mono, fluorocarbon, and braid. When making sure the jam knot is fully set and tight on a hook or lure, you can attach the hook to a fixed object and give a strong pull. That will make sure the knot is set tight and won’t come loose when fished. This knot is one of the stronger knots available and has been tested rigorously by the San Diego Tuna boats.

San Diego Jam Knot Know Your Knots

Step 1

Run the line through the eye of the hook and bring the tag end of the line back along the mainline.

San Diego Jam Knot Know Your Knots

Step 2

Take the tag end of the line and then wrap it around the main line multiple times, a minimum of 4 wraps, the more the better. The thicker the diameter of the line the fewer wraps needed, and the thinner the line or if using braided line more wraps are needed

San Diego Jam Knot Know Your Knots

Step 3

Take the tag end of the line and pass it through the double line next to the eye of the hook and then the loop made by the first wrap.

San Diego Jam Knot Know Your Knots

Step 4

Hold the hook or lure and pull and adjust the tag end of the line to tighten the knot up after moistening the line. Be careful not to mess up the wraps and have them go over each other.

San Diego Jam Knot Know Your Knots

Step 5

Trim off the excess line from the tag end of the line, leaving about 1/4″ behind for the tag. Then pull the knot down to the eye of the hook and tighten it up. You can put the hook or lure somewhere solid and give it a solid pull to make sure the knot is tight. This is the finished San Diego Jam Knot.

Avatar Author ID 322 - 1043408214

Eugene L.

Fishing Writer for AllOutdoor.com An avid angler since I was little, based out of the South East United States.

Source Link

COMMENTS

WORDPRESS: 0