Adding shore power sanity check : overlanding

HomeLifeOverlanding

Adding shore power sanity check : overlanding

Your shore power is 30amps at 120volts. When that goes through your PD convertor, 120volts/30amp becomes 12 volts 300 amps. 3 0 0 Whic

Hunter Shoots Turkey with Six Beards and Busted Spurs
Sow Grizzly Traveled 2,800 MIles
Ray Scott Has Passed at the Age of 88

Your shore power is 30amps at 120volts. When that goes through your PD convertor, 120volts/30amp becomes 12 volts 300 amps. 3 0 0 Which is why DC wiring is HUGE. I see other problems in your sketch. You need a 300amp fuse to protect your battery and it goes between the battery and bus bar. Please read this guys blog https://www.explorist.life/2000w-520w-60a-budget-friendly-camper-wiring-diagram/

also search youtube for his explorist life victron videos (still worth watching even if you don’t use victron). buy the plan in the blog link above for $10 here https://shop.explorist.lifeHe does a nice job in his diagrams because he also tells you what size wire you need.

Also your right-most 6 circuit blue sea fuse block will have to be the one with a negative bus bar. There’s a 6 circuit without, make sure you get the right one. but the 6 circuit can handle 100amps at 12v, so the breaker on that one should be bigger than 30amp. But I learned so much reading the links above and watching his videos. (I’m not him I swear). It’s just a great resource.



Source Link

COMMENTS

WORDPRESS: 0